How To Take Sharper Pictures :: Digital Photo Secrets

How To Take Sharper Pictures

by David Peterson 16 comments

A few weeks ago, we talked about why sharpening is important and what you can do to sharpen your images in post production with software like Adobe Photoshop Elements. Now that you’re armed with this knowledge, why not take it one step further? Why not learn how to take sharper images from the very start so you don’t have to worry about sharpening them later on? Let’s dive into it!

What makes an image sharp?

A number of different factors affect sharpness, and they’re all important if you want to understand how to take perfectly sharp images straight from the camera. Out of all of these, which do you think affects sharpness?

  • The aperture setting.
  • How far away you are from your subject.
  • How still you can hold your camera.
  • The shutter speed setting.
  • The ISO speed setting.
  • How far away the background is from your subject.
  • The amount of light available in the scene.
  • The type of lens you’re using.

Naturally, it’s a trick question. All of these affect the sharpness of the pictures you take. They are all relevant. That’s the sort of perspective we need to take on sharpness, and it’s the reason why sharpness is considered a sort of mythical “holy grail” of photography. Those who are seasoned and experienced with the art seem to know how to pull sharpness out of thin air.

There’s a second aspect to sharpness that can easily go unnoticed if you don’t address it right away. Before you take any picture, ask yourself which parts of your photo should be the sharpest and which should be a little blurry or completely blurred out. Sharp for sharp’s sake doesn’t a good photo make. You need to make a creative decision and apply sharpness only where it’s needed.

Case in point, a portrait. Unless you’ve got a perfectly clean background behind your subject, you normally won’t want the background to be sharp. You’ll actually want it to be a little blurry so as to draw less attention to itself and more attention to the person in the photograph. That’s what I mean by making a creative decision. Before you decide to make an image more sharp, you need to pick the area you want sharp.

A breakdown of what affects sharpness

Chances are you already knew that. I just hate to leave the important stuff out. I think that if we’re going to look at sharpness from the camera’s side of the equation, we really ought to break down everything that can contribute to or detract from the sharpness of your images. So, without further ado, here’s the giant checklist.

The aperture setting

Aperture affects sharpness by making the light entering your camera more or less organized (that's a simplification, but it will do for our purposes). A very small aperture does a better job of organizing the light, resulting in a sharper image on your camera’s sensor. A very wide aperture, on the other hand, leaves you with a more disorganized kind of light. Whatever isn’t exactly in focus will appear blurry or out of focus.

How far away you are from your subject

You probably weren’t aware of this, but the closer you get to your subject, the less sharp the image of your whole subject becomes. That’s why it’s very common to see macro images of insects where only a small part of the insect is sharp while the rest of the scene remains out of focus. Contrast this with giant sweeping landscapes the are almost entirely in focus. Part of their sharpness results from focusing on the furthest point in the background and making it the main subject.

For example, with such a short distance from the bee in the image to the right, depth of field decreases and only the insect remains sharp.

How still you hold your camera

If you’re shaking while you take the picture, and you’re using a slow shutter speed (even a fast one sometimes), it will adversely affect the sharpness of the resulting image. You have two options if you want to correct this. You can either get a tripod, or you can learn some breathing and camera holding techniques for optimal results. In general, exhale as you take a picture, and hold your camera as close to your body as possible.

The shutter speed setting

Shutter speed only affects sharpness if you’re holding the camera as you take the picture. If you’re set up on a tripod, you can ignore this. Here’s the basic rundown. As you increase your shutter speed, your image becomes less susceptible to the effects of you shaking your camera (even if it’s slight) while pressing the shutter button. To increase sharpness, increase the shutter speed.

The ISO speed setting

A handy tool for getting more out of a low-light situation. Such handiness, however, must come at a cost. Whenever you increase the ISO speed, your image becomes slightly more grainy and a little less sharp. That’s why some camera makers have gone so far as to create new ISO speed settings like 50 (half of the lowest value), which have nothing to do with the film standard ISO speed evolved from. Photographers want more sharpness, and this is one way to give it to them.

How far away the background is from your subject

A far away mountaintop will be less sharp than the Swedish cottage your friend is standing in front of. That’s just the way light works. There’s more atmosphere for the light to pass through the further away an object is, so the light coming through the lens is a lot more disorganized. Couple that with a wide aperture, and you can see what happens. You see your friend’s face, and you can make out some of the cottage. But forget about the mountain. It’s a mess of hexagon-shaped light (a.k.a. a bokeh).

A wonderful example of how sharpness arises from contrast. The subject is standing so far away from the background that the lines of his face and his hair appear more defined. As a result, he appears more sharp.

The amount of light available in the scene

I’ll admit that this is only tangentially relevant to sharpness. You don’t necessarily need a lot of ambient light to make a sharp image. But man, it sure does help. When you have more light, you can use a smaller aperture or a faster shutter speed. Those two, as we’ve said earlier, will definitely give you a sharper image.

The type of lens you’re using

Have a look through some old photos, and you’ll notice something right away. They’re a lot less sharp than the images we’re used to in today’s day and age. Why is that? Simply put, lenses weren’t as well constructed as they are today. They didn’t do as good of a job of organizing the light into a straight path. As a result, early images have a kind of dreamy soft-focus sort of look. Most of it can be attributed to the lens itself.

What about high-end lenses and their off brand counterparts? Is there a real difference there? It would be foolish to say there isn’t. A more expensive lens will give you a somewhat sharper image, but here’s the thing. All of the other factors we’ve mentioned influence the sharpness of your image a lot more than the lens you choose. If anything, a difference in the lens (especially by today’s standards) has only a small effect.

In other words, nothing is a replacement for good old fashioned technique. It doesn’t really matter what camera you have. Any camera is pretty much as good as another when it comes to sharpness. The “trick” is to grab one, get out there, and take as many pictures as you can. Your images will become sharper as you evolve into a better photographer.

Most people think this post is Awesome. What do you think?


  1. Cecilia says:

    Great article as usual , thanks David. I have a question. I'm a keen bird photographer. A professional advised me to use back button focus, set the ISO to auto, Av to about f5.6 or less and Tv over 500 -1000.
    I must say I've had some great shots following this advice, but they they often look much sharper in the camera than on the computer screen :(
    I suppose a smaller Av would be better with a lower ISO, though the auto ISO allows me to get the shot when I need to get it in a hurry.

  2. David Peterson says:


    Yes, that's a common problem caused by the printing aspect ratio of printed photos being different than your P&S camera. Here's my article explaining it.


  3. Kristy says:

    Totally of subject here but I have a Nikon 3100 and I am having trouble when printing photos the photos always need to be cropped otherwise I end up with missing heads or half a picture is there a setting I can change on my camera or something to save in photoshop elements so I don't have to crop my photos when printing please help it is very frustrating p. s I love all your tips

  4. dda says:

    I have and use a tripod for stability, but have two other tools I use more often. One is a mono-pod that doubles for a walking stick when I'm shooting in rough landscape areas and the other is a miniature 10" tripod when I'm shooting in-doors. I even keep it installed on my Canon SX 30 IS camera in a collapsed mode when circumstances really don't require it to capture the shot, but it creates a kind of stick handle which helps my general stability on general type shots. I am approaching 60 years old and I find I'm a little shaky anyway and every bit of extra stabilization helps.

  5. Mac says:

    Dave; thanks for the great tip on sharpness, I'm just learning photography and thought my pictures were not coming out sharp becouse of a cheaper lens that come with camera kits. alas its still me! I'll learn someday


  6. Rickard Olsson says:

    iris and theresa, generally speaking you should leave that kind of sharpening for the computer. This is why:

    1. Your computer has more processing power than your camera so it can make a better job of churning through the math that's involved in sharpening. Also, it has more time to do it right. your camera needs to be ready for the next shot in milliseconds - the computer doesn't.
    2. There's an Undo button on the computer. If you choose too much sharpening, too little, or the wrong type for that specific image, you can try again.

    Personally, I cheat by using both. :-) My camera (Pentax K-5) has an option to both save scaled, sharpened and processed JPEGs as well as untouched RAW files, so if I just want to blog or e-mail a snapshot it's right there in "good enough" quality off the card, but if I want to tweak the last drop of quality out of the image, I load the RAW file in the computer.

  7. David Peterson says:

    @Iris and @Teresa,

    Good point. Stay tuned - I'm writing an article on how to use the sharpening setting on your camera.


  8. theresa says:

    Looks like Iris and I are asking the same question....inquiring minds would like to know. Thanks, David.

  9. theresa says:

    I've read conflicting thoughts on setting the sharpness level on the camera to get sharper images. What's your thought David...should I set the sharpness level on my camera, or leave it at zero and sharpen it in post processing?

  10. Ross says:

    hi David
    You are a brave man addressing sharpness for a general audience, with say a point and shoot camera where aperture is impossible to change and also shutter speed.
    So, there would appear to be a hierachy of issues for various camera type users.
    The general 'camera steady' comment is important for all as most fuzziness with digital cameras occurs from this cause.
    Then there are some CMOS challenges re focus, so on most cameras some sharpening can be applied.
    Sweet aperture, bean bag, holding your arms into your chest and holding your breathe as you press the trigger all are good techniques.
    Well done though and I congratulate you for being brave.

Leave a Comment

Your email address will not be published. Required fields are marked *